PROUSER 18147, Manual, Page: 5 / 52

5
CHARGING THE BATTERY (CONTROLS AND INDICATORS)
A small LED display, eight LED indicators and six push switches make up the controls and
indicators for this charger.
PUSH SWITCHES:
ON/OFF
:
Press and keep 1 second, the charger is powered on, the display shows “000” (standby
mode). If this switch is pressed and kept 1 second during working, the charger will quit
from any operating modes and be powered off.
6/12/24 V SELECT :
Press to select battery voltage.
Battery Type :
Press to select battery type from WET (Standard Lead Acid Batteries), AGM (AGM and
Deep Cycle Batteries) and GEL (Gel Batteries)
2/6/12 AMP SELECT :
Switch the charge rate among 2 Amp, 6 Amp, 12 Amp and standby mode (Please see table
below for reference). The display changes after each press and the
charger will start to
work with the set rate 1 second after the last press.
CHARGE RECOMMENDATION
VOLTAGE CHARGING RATE BATTERY CAPACITY
6V 2A 5Ah - 40Ah
6V 6A 20Ah - 120Ah
6V 12A 40Ah - 240Ah
12V 2A 5Ah - 40Ah
12V 6A 20Ah - 120Ah
12V 12A 40Ah - 240Ah
24V 2A 5Ah - 40Ah
24V 6A 20Ah - 120Ah
BATTERY VOLTAGE
:
Press this button in standby mode or during charging, the display shows the battery
voltage and keep 3 second.