Page 21 of 68
Proton Products InteliSENS PD30 Instruction Manual (Issue 1a)
Home page 1
Home page 2
- Gauge status - PID status
- Measured diameter
- Error (measured diameter
– preset diameter)
- Error bar to indicate above value pictorially
Press the
button to reset the controller output voltage to zero.
Press the
button to turn ON the controller outuput.
Press the
button to HOLD the controller output voltage
constant at its current value.
Press the
button to access the function menu page.
Press the
button to advance to
“Home Page 2”.
- Gauge status - PID status
- Measured Ovality = max(diameter)
– min (diameter)
- Ovality error = Measured Ovality
– Preset Ovality
- Ovality error bar to indicate above value pictorially
Press the
button to access the function menu page.
Press the
button to advance to
“Home Page 4”.
