HOW TO PREVENT FLY AWAYS
To prevent “fly-away” situations (where drones seem to fly away out of control)
it is important to first test and practice within close range before letting the
drone fly too far away.
Each drone is designed to turn off the engines if the radio signal is lost.
It is important to know and test the range of your drone before flying. We
recommend turning on and syncing the drone and walking away while
testing the engines. Keep walking and testing until it is obvious when you
reach the point where the signal is not controlling the drone. This will be the
control limit for the conditions in which you are flying. Distance does vary
somewhat based on environmental and weather conditions, so testing
the limit is advised. Fly in a range that is good for easy visual operation of
the drone.
IF YOU CAN’T SEE YOUR DRONE, THEN YOU CAN’T CONTROL YOUR
DRONE.
* Fly-aways are not covered by warranty as they are overwhelmingly caused by
pilot error.
FLYING OUTDOORS
14
TRAINING LOOP
Unfold the included training loop and slide into the notches of the two
brackets. The training loop should stand on its own.