CHARGING THE QUAD-COPTER BATTERY
缺产品
1. Push the on/off switch of the
quad-copter to OFF and open
the battery cover.
2. Pull out the battery wire from
the power port.
3. Connect the USB charging
cable to the battery wire.
4. Plug the charger into a USB
port. The USB will light up while
charging and will turn off once
fully charged.
5. Reconnect the battery wire to the power port
and close the battery cover.
Charging time: approximately 75 minutes ---
Flying time: approximately 7 minutes
1. When charging, place product on a dry, well-ventilated surface and keep away from heat
sources.
2. Always use adult supervision while charging.
3. As battery temperature is high immediately after flight, charge after cooling down for
higher efficiency.
4. Do not strike or subject battery to hard impacts or sharp surfaces.
5. Do not use any other charger than that which is supplied with this item.
6. Do not use or leave battery near a heat source such as fire or space heater; exposure to
heat may result in reduced performance or in some cases dangerous conditions.
7. If battery is left in charging state for an extended period of time after being fully charged,
the battery may automatically discharge.
8. Never leave the battery unattended during charging.
CAUTION WHEN CHARGING
4
