INS8800 Rev. D
17
Protimeter MMS2 Instruction Manual
4.7b Date and Time
Navigate to
SELECT MODE -> SETTINGS -> DATE AND TIME
and press
to
change the date and time. Use
to navigate to the required field. Then, use
/
to increment/decrement the value in that box.
After entering the required date and time, press
to set the date and time.
The new date and time are displayed at the top right corner of the screen. Date
and time can also be set up by connecting to a PC and using the optional
MMS2 logging software.
4.7c
Auto Off
The MMS2 will switch
OFF
automatically after auto switch off time, if no
activity/key press is observed. Navigate to
SELECT MODE -> SETTINGS ->
AUTO OFF
and press to configure the Auto off time. Use
/
to
navigate between 0 to 6 minutes and press
to set the Auto off time. To
disable the Auto off feature, set the Auto switch off time to 0.
Note:
During continuous logging operation, auto switch off time is
considered to be the display turnoff time.
4.7d Set Brightness
Navigate to
SELECT MODE -> SETTINGS -> SET BRIGHTNESS
and press
to
set the Brightness level. Use
/
to navigate between the different
brightness levels (1 to 10) and press
to set the desired brightness.
(Brightness level 2 is the default setting.)
Summary of Contents for MMS2
