for 15 seconds, and then reinstall the new batteries. If the monitor still shows “E1” and
beeps, please call service man.
3. If the monitor shows “ E2 ”message, please call service man.
B. Clock and Date Setting:
1) After power on the monitor, the top of the LCD will display “
PM
12:00
00
01
D
01
M
03
Y
”
and the hour display will flash.
2) Press
♁
or
\
button to set up the hour value and then press the ENTER button to
confirm your setting value.
3) Minute display will flash. Press
♁
or
\
button to set up the minute value and then
press the ENTER button to confirm your setting value.
4) The Letter of E will flash. It is means the language is English. Press
♁
or
\
button to
choose the language you prefer to use. E means English; D means German; F means
French; I means Italian; S means Spanish; A means USA. The indication of date is
Month-Day-Year in USA and the others are Day-Month-Year.
5) The year display will flash. Press
♁
or
\
button to set up the year value and then
press the ENTER button to confirm your setting value.
6) The month display will flash. Press
♁
or
\
button to set up the month value and then
press the ENTER button to confirm your setting value.
7) The day display will flash. Press
♁
or
\
button to set up the day value and then
press the ENTER button to confirm your setting value.
8) The display will go to the program 1.
Note:
If you would like to set alarm, cancel alarm or change clock and date setting, press the
♁
or
\
button in the stop mode and go to the clock setting program. This program is
located behind of the program 12 and the window will show SET.
1. Hold the START/PAUSE button two seconds to enter the alarm setting. The
operating procedure is same as the clock setting above.
2. Press the START/ PAUSE to choose with alarm or without alarm function. With
alarm function, the window will display the bell picture. Without alarm function, the
bell picture will disappear from the window.
3. Hold the ENTER button two seconds to enter the clock and date modify function.
The operating procedure is same as the clock above.
Note:
When take off the adaptor or run out of battery will clear the data of clock and date.
C. KEY BOARD:
1. MODE : Change the display of Speed & Cal. Functions to RPM & Performance value
functions, and keep the other functions as the same.
2. ENTER : During PAUSE mode, press ENTER key to enter Time or Age(only in 11
th
&
12
th
program) setting.
3. START/PAUSE : To start or pause exercising.
Hold this button for 2 seconds can enter initial mode & reset all value
to
zero.
4.
♁
: Selects Program or sets up the values of load level, time and age. Or set up the
values of clock, date and alarm.
5.
\
: Selects Program or sets down the values of load level, time and age. Or set up the
values of clock, date and alarm.
D. OPERATING STEPS :
This system contains of 12 different programs and you can preset the workout time and
system will divide the time by 10 intervals. If you don’t preset workout time, system will
