Use this key to start or end a workout.
4. ENTER
a. Before start any program, pressing this key to enter the program setting.
b. While in program setting, pressing this key to toggle to between each
program options.
5. MODE
Use this key to toggle screen saver ON/OFF while working out. Switch to
different screen saver using UP/DOWN keys.
6. RESET
a. While setting any value within a quick program, pressing this key will set
current value to zero.
b. While holding this key for 2 seconds, it will return all values back to
manufacture default except User Program and Body Fat programs.
7. PULSE
RECOVERY
This feature can be applied any time during or after the workout. It estimates the
differentiation of your pulse in one minute. From the computerized formula,
PULSE RECOVERY derives an approximation of your cardiovascular fitness,
scaling from F1.0 to F6.0.
F Condition
1.0 Excellent
2.0 Very
Good
3.0 Good
4.0 +Average
5.0 Below
Average
6.0 Poor
8. CONSTANT
POWER
While in Manual or P1 ~ P12 program or User Program, pressing this key will
switch resistance level to Watt control. While in Watt control mode, you can use
UP/DOWN to set your desire value.
9. SCAN
This key offers 3 different modes to view display windows.
a.
Upper values (SPEED/DIST/TIME/PULSE/CAL)
b.
Lower values (AVG SPEED/RPM/SEGMENT TIME/LEVEL/WATT)
c.
Rotate between upper an lower values every 6 seconds; While in the
rotating mode, SCAN LED will be flashing every half second to distinguish
from other two modes.
There are total of 16 program quick keys including, Manual, P1 ~ P12, User Program,
Heart Rate Control (H.R.C) and Body Fat.
