ProTelevision PT 5780, Instruction Manual

Page: 89 / 95

PT 5780 DVB-T Modulator ProTelevision Technologies RS232 Communication
Instruction Manual Revision 3.11
6-31
6.3.3.12 EVENt subsystem
Command Parameter Status after
Factory Reset Remarks
:COUNt? Query only. Response
format is:
<n>
n : total number of events
recorded in the log
:CLEAr No Query. Clears the
entire event log.
:VIEW? n
n = 0 to max event count Query only. Response
format is:
<id number, “tds”, “info”>
id number : identification
number for the recorded
event type
tds: time and date stamp
for the event in the
format “yyyy-mm-dd,
hh:mm:ss”
info: Supplementary text
string describing the
event type
6.3.3.13 TEST subsystem
Command Parameter Status after
Factory Reset Remarks
:ENABle OFF | SCARrier | M1Carrier |
M50Carrier | TSSTuffing OFF
:M1Carrier 1 to 1705 1 -1 carrier in 2k mode.
1 to 6817 1 -1 carrier in 8k mode.
:M50Carrier 1 to 1705 1 -50 carrier in 2k mode.
1 to 6817 1 -50 carrier in 8k mode.
6.3.3.14 FACTory subsystem
Command Parameter Status after
Factory Reset Remarks
:SNINst? <Instrument Serial No>
:SNXAcboard? <XA Serial No>
:MONitor
:LIMits?
“MC_BT” | “MC_025V” |
“MC_033V” | “MC_050V” |
“MC_120V” ,
<lower limit>,
<upper limit> Format for query
command:
:FACT:MON:LIM?
“MC_BT”
:MONitor
:CURRent?
“MC_BT” | “MC_025V” |
“MC_033V” | “MC_050V” |
“MC_120V” Query only.