to dry naturally, and shall be kept away from direct heat. In metallic products some mechanic parts
(spring, pin, hinge, etc.) can be regularly slightly lubricated to ensure better operation.
!
personal protective equipment should be stored loosely packed, in a well-ventilated place,
protected from direct light, ultraviolet degradation, damp environment, sharp edges, extreme
temperatures and corrosive or aggressive substances.
!
U
sing the harness in connection with
personal protective equipment agains falls from a height
must be compatible with manual instructions of
this equipment
and obligatory standards:
-
EN353-1, EN353-2, EN355, EN354, EN360
- for the fall arrest systems;
- EN362 - for the connectors;
- EN1496, EN341, EN1497, EN1498 - for rescue devices;
- EN813 - for sit harness;
- EN358 - for work positioning systems;
- EN795 - for anchor devices.
Manufacturer:
PROTEKT - Starorudzka 9 - 93-403 Lodz - Poland
tel. +4842 6802083 - fax. +4842 6802093 - www.protekt.pl
This device meets the requirements of Regulation (EU) 2016/425 on personal protective equipment.
The EU declaration of conformity is available at protekt.pl
Notified body for
E
U
type examination
according to PPE Regulation 2016/425:
Notified body for control production:
APAVE
SUDEUROPE
SAS
- No. 0082
–
CS
60193
–
F13322
MARSEILLE
CEDEX
16
, France
PRS Polski Rejestr Statków S.A. - No.1463, al. gen. Józefa Hallera 126 80-416 Gdańsk, Poland
IDENTITY CARD
SERIAL
/BATCH
NUMBER
It is the responsibility of the user organisation to provide the identity card and to fill in the
details required.
The identity card should be filled in before the first use by a competent
person, responsible inthe user organization for protective equipment.
Any information about
the equipment like periodic inspections, repairs, reasons of equipment's withdra
wal
from use
shall be noted into the identity card by a competent person
in the user organization.
The
identity card should be stor
ed
during a whole period of equipment utilization.
Do not use the
equipment without the identity card.
MODEL AND TYPE OF EQUIPMENT
PERIODIC
INSPECTION
AND REPAIR HISTORY
CARD
REFERENCE
NUMBER
DATE OF
MANUFACURE
DATE OF
FIRST USE
DATE OF PURCHASE
NEXT
INSPECTION
DATE
DATE OF
INSPECTION
REASON FOR
INSPECTION
OR REPAIR
DEFECTS
,
CONDITION
NOTED
REPAIRS CARRIED OUT
NAME AND SIGNATURE
OF COMPETENT
PERSON
USER NAME
