· 16
CHARGING LITHIUM BATTERIES
The left side of the first line shows the type of battery to be
charged. The value on the left of the second line is the charge
current, which can be adjusted (0.1-10.0A). The right side of
the second line shows the number of cells in the battery, along
with the nominal voltage (3.7-22.2V, 1-6S).
This displays the number of cells automatically detected (R),
along with the number of cells indicated on the previous screen
(S). If both numbers are identical, you can start the charging
process by pressing the
Start/Enter
button. If the numbers do
not match, press the
Batt Type/Stop
button to go back to the
previous screen.
This screen shows the real-time status of the charge process.
Press the
Batt Type/Stop
button once to stop the charge
process.
Charging lithium batteries in the charge mode
Lithium batteries with no balance lead should be charged using the standard charge
mode (indicated on the right of the first line of the screen).
Note:
ProTek R/C recommends charging lithium batteries with a balance lead in the
Balance Mode
only.
INC
INC
DEC
DEC
-
-
+
+
Start
Enter
Batt Type
Stop
Start
Enter
Charged
capacity
Number
of cells
Charging
Time
Charging
Current
Battery
Voltage
'> 3 seconds’