Connecting the Battery
Before connecting the Prodigy 620 DUO to a battery, it’s essential to verify that the
charger’s parameters match the battery to be charged or discharged; incorrect settings
may damage the battery and can cause a fire. To avoid short-circuiting the battery pack,
always connect the large leads to the charger before connecting to the battery. When
disconnecting, unplug the battery first and then the charger.
Balance socket:
Before charging a LiPo battery in Balance Charge mode you must first connect the
battery’s balance plug to the charger’s balance plug port. Check the plug’s polarity
before connecting to prevent damage to the battery. (See photo below).
This photo shows the correct way to connect your battery to the Prodigy 620 DUO while
charging in the balance charge program mode only.
· 12
CONNECTING THE BATTERY
WARNING:
Failure to connect as shown in this photo will damage this charger.
To avoid a short circuit between the charge lead always connect the charge cable to the
charger first, then connect the battery. Reverse the sequence when disconnecting.