Electric Water Pump with Controller
5
Maintenance
•
Our pumps do not require any maintenance provided one takes the following precautions:
•
When there is a risk of freezing, empty the pump through the drain plug on the bottom of the pump body,
making sure you prime it when subsequently starting it again.
•
Check that the foot valve is clean at regular intervals.
•
If the pump is to remain unused for a long period of time (e.g. in the winter), it is advisable to empty it
completely, rinse it with clean water and store it in a dry place.
•
If the shaft does not turn freely, release it with a screwdriver by inserting it in the special slot. If this is not
sufficient to solve the problem, remove the pump body, undoing the relevant mounting bolts, and clean it
thoroughly to remove any encrustations.
ATTENTION
: If the supply cord is damaged, it must be replaced by the manufacturer or a similarly qualified
technician in order to avoid a potential safety hazard.
Never carry out any work on the pump without having first disconnected it from the mains supply.
Specifications
SKU
PMPPWCPROA4C0
Brand
PROTEGE
Power kW
2,350W / 3.15hp
Maximum Head Height
80m
Water Pump Inlet
1" (25mm)
Water Pump Outlet
1" (25mm)
Flow Rate
7,200L/Hr
Colour
Yellow
Product Weight (kg)
10.15kg
Height
230mm
Length
370mm
Width
230mm
Gross Weight
11kg
