Securi
ty Camera
15
If your router is WPS Enabled follow the directions for pairing WPS
Enabled Devices. This step will save the wireless information to the
camera but will not add it to your Protect America Interactive account.
Refer to your router's owner's manual for direction on how to place in
discovery mode.
To put the camera into discovery mode: Press and hold the WPS
button for 3 seconds or more, until the LED turns flashing BLUE. The
devices will connect and pair up. The wireless settings will be saved
to the camera. The camera's
WPS Discovery Mode will last 2 minutes
(120 seconds). If it does not connect using the WPS feature try again
with the Camera Installation (Wireless Configuration, page 9).
Wireless Configuration
