protech PS6508 Series, User Manual

Page: 63 / 86

Chapter 4 Award BIOS Setup
Page: 4-14
PS6508 SERIES USER
′
S MANUAL
SUPER IO DEVICE:
You could expand the whole menu by pressing <ENTER>, and you will see a
screen like the one listed below:
Phoenix – Award CMOS Setup Utility
SuperIO Device
Item Help
Onboard Serial Port 1
Onboard Serial Port 2
Onboard Parallel Port
Parallel Port Mode
X ECP Mode Use DMA
[3F8/IRQ4]
[2F8/IRQ3]
[378/IRQ7]
[SPP]
3
Menu Level ►
↑↓→←
:Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
Table 3 – SuperIO Device sub menu
Descriptions of each item above are listed below:
1.
Onboard Serial Port 1/2
Select an address and corresponding interrupt for the first and second
serial ports
2. Onboard Parallel Port
This item allows you to determine access onboard parallel port
controller with which I/O address.
3. Parallel Port Mode
Select an operating mode for the onboard parallel (printer) port.
Select
Normal, Compatible,
or
SPP
unless you are certain your
hardware and software both support one of the other available modes.
4. ECP Mode Use DMA
Select a DMA channel for the parallel port for use during ECP mode
ONBOARD SERIAL PORT 3
ONBOARD SERIAL PORT 4:
Select a logical COM port name and matching address for the third and forth
serial ports. Select an address and corresponding interrupt for third and forth
serial port.