protech ProX-1695, User Manual

Page: 71 / 95

Chapter 5 Award BIOS Setup
Page: 5-24
Prox-1695 USER
′
S MANUAL
ONBOARD PARALLEL PORT:
Select a logical LPT port name and matching address for the physical
parallel (printer) port.
PARALLEL PORT MODE:
Selecting an operating mode for the onboard parallel port. Select
Compatible or Extended unless you are certain both your hardware and
software support EPP or ECP mode.
5-11. PASSWORD SETTING
You may choose to select to set either supervisor or user password, or both
of them. The differences is that the supervisor password can enter and
change options of the setup menus while user password can only enter setup
menu but does not have any rights to change any settings.
TO SET A PASSWORD
If you want to enable this item you should choose the
〝
PASSWORD
SETTING
〞
option from the main menu, the following message will
appear at the center of the screen to assist you in creating a password.
Enter Password:
Type the password, up to eight characters, and press < Enter >. You will
be asked to confirm the password. Type the password again and press <
Enter >. You may also press < Esc > to abort the selection and not enter
a password.
To change the original password, enter CMOS setup Menu again and you
will be asked to enter the original password, then select
〝
PASSWORD
SETTING
〞
and press enter. The system will asked you to enter a
password, and then you may enter new password and re-type new
password for confirmation.