protech ProX-1550, User Manual

Page: 88 / 110

Chapter 5 Award BIOS Setup
Page: 5-24
Prox-1550 USER
′
S MANUAL
5-12 IDE HDD AUTO DETECTION
Choose the
〝
IDE HDD AUTO DETECTION
〞
option . The screen will be
shown as below.
ROM PCI / ISA BIOS (2A5KFP6C)
STANDARD CMOS SETUP
AWARD SOFTWARE, INC.
CYLS. HEADS PRECOMP LANDZONE SECTORS MODE
Primary Master : ( Mb) 0 0 0 0 0 -------
Primary Slave :
Secondary Master :
Secondary Slave :
Select Secondary Slave Option (N=Skip) : N
Option Size Cyls Heads Precomp Landzone Sectors Mode
______________________________________________________________
2(Y) 540 524 32 0 1048 63 LBA
1 541 1049 16 65535 1048 63 Normal
3 540 524 32 65535 1048 63 LARGE
Note: Some Oses (like SCO-UNIX) must use “Normal” for installation
Esc : Skip
IDE HDD AUTO DETECTION Screen
This setup menu allows you to save time in finding the Hard Disk Drive
information, just follow the following steps:
1. Select the
〝
IDE HDD AUTO DETECTION
〞
from the Main Menu.
2. After a couple of seconds, the screen will appear the Hard Disk information
and following message:
“SELECT PRIMARY MASTER OPTION (N=SKIP):N”
3. Enter Y or N to confirm the acceptance of the parameter reported by BIOS,
then press the <ENTER> key.
#
The process will repeat again form Primary Slave, Secondary Master and
Secondary Slave Hard Disks.