protech POS-3520 Page 44 User Manual Download

Page: 44 / 109

Chapter 3 Software Utilities

POS-3520 USER

′

S MANUAL

Page:3-5

3-4. LAN DRIVER UTILITY

The POS-3520 Series is enhanced with LAN function that can support
various network adapters. Installation platform for the LAN driver is
listed as follows:

1. Win XP Series
2. Win 7 Series

For more details on the Installation procedure, please refer to the

Readme.txt file found on LAN Driver Utility.

3-4-1. Installation of LAN Driver

To install the LAN Driver, follow the steps below:

1.

Connect the USB-CD ROM device to the POS-3520 and insert the
driver disk inside.

Enter the “LAN” folder where the LAN driver is located (depending
on your OS platform).

Click

Setup.exe

file for driver installation.

Follow the on-screen instructions to complete the installation.

Once installation is completed, shut down the system and restart the
POS-3520 for the changes to take effect.

Summary of Contents for POS-3520














































































































Search results

Summary of Contents for POS-3520

Reviews:

Related manuals for POS-3520

Brands by name

Popular brands

protech POS-3520, User Manual

Search results

Summary of Contents for POS-3520

Reviews:

Related manuals for POS-3520

Brands by name

Popular brands