Chapter 4 Award BIOS Setup
Prox-1750G1/G2 USER
′
S MANUAL
Page: 4-21
RESET CONFIGURATION DATA:
Normally, you leave this field Disabled. Select Enabled to reset Extended
System Configuration Data (ESCD) when you exit Setup if you have
installed a new add-on and the system configuration has caused such a
serious conflict that the operating system can not boot.
RESOURCE CONTROLLED BY:
The Award Plug and Play Bios can automatically configure all of the booth
and Plug and Play-compatible devices. However, this capability means
absolutely nothing unless you are using a Plug and Play operating system
such as Windows 95. By choosing “manual”, you are allowed to
configure the
IRQ Resources
,
DMA Resources
and
Memory Resources
.
The choices are Auto(ESCD) and Manual.
IRQ RESOURCES:
You may assign each system interrupt a type, depending on the type of
device using the interrupt.
IRQ3/4/5/7/9/10/11/12/14/15 ASSIGNED TO:
This item allows you to determine the IRQ assigned to ISA bus and is not
available to any PCI slot. Legacy ISA for devices compliant with the origi-
nal PC AT bus specification, PCI/ISA PnP for devices compliant with the
Plug and Play standard whether designed for PCI or ISA bus architecture.
DMA RESOURCES:
When resources are controlled manually, assign each system DMA channel
a type, depending on the type of device using the DMA channel.
DMA 0/1/3/5/6/7 ASSIGNED TO:
Legacy ISA for devices compliant with the original PC AT bus specifi-
cation, PCI/ISA PnP for devices compliant with the Plug and Play standard
whether designed for PCI or ISA bus architecture.
PCI/VGA PALETTE SNOOP:
Leave this field at disabled.
