Protech Systems PPC-7400, Operation Manual

Page: 83 / 118

Chapter 4 Award BIOS Setup
Page: 4-20
PPC-740X USER
′
S MANUAL
4-8. PNP/PCI CONFIGURATION
Choose
ň
PNP/PCI CONFIGURATION
ʼn
from the main menu, a display
will be shown on screen as below:
Phoenix - AwardBIOS CMOS Setup Utility
PnP/PCI Configurations
PNP OS Installed
Reset Configuration Data [No]
[Disabled]
Item Help
Resources Controlled By
x IRQ Resources
x DMA Resources
PCI/VGA Palette Snoop
[Auto(ESCD)]
Press Enter
Press Enter
[Disabled]
Menu Level ►
Select Yes if you are
using a Plug and Play
capable operating
system Select No if
you need the BIOS to
configure non-boot
devices
↑↓→←
:Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
PNP/PCI Configuration Setup Screen
This section describes how to configure PCI bus system. PCI, also known as
Personal Computer Interconnect, is a system, which allows I/O devices to
operate at speeds nearing the speed of the CPU itself uses when communica-
ting with its own special components. This section covers technical items,
which is strongly recommended for experienced users only.
PNP OS INSTALLED:
This item allows you to determine install PnP OS or not.
RESET CONFIGURATION DATA:
Normally, you leave this field Disabled. Select Enabled to reset Extended
System Configuration Data (ESCD) when you exit Setup if you have
installed a new add-on and the system configuration has caused such a
serious conflict that the operating system cannot boot.