Appendix B Technical Summary
EB-591LF USER
′
S MANUAL
Page: B-15
III.
BIOS update procedure
1.
Use the bootable USB device to boot up system into the MS-DOS command
prompt.
2.
Type in
AFUDOS E591xxxx.rom /p /b /n /x
and press enter to start the flash
procedure. (Note that
xxxx
means the BIOS revision part, i.e. 0P01)
3.
During the update procedure, you will see the BIOS update process status and its
percentage. Beware! Do not turn off system power or reset your computer if the
whole procedure are not complete yet, or it may crash the BIOS ROM and make
system unable to boot up next time.
4.
After BIOS update procedures is complete, the messages from afudos utility
should be like the figure shown right below:
5.
Youcan restart the system and boot up with new BIOS now.
6.
Update is complete after restart.
