15
Installation of the Post Driver.
1.
The Post driver is delivered with Slew arm perpendicular to the main frame
and with the Slew lock pin fitted to lock the arm. Ensure the machine is
manoeuvred this position before unhitching from the tractor.
2.
With the machine positioned on a firm level site and securely supported,
manoeuvre the tractor squarely up to the machine with the tractors link arms
set to a height level with the machines lower link brackets.
3. Connect the tractors link arms to the machine lower link brackets and retain
in position with the linkage and lynch pins supplied.
4. Connect the tractor top link (not supplied) to the machine and secure with the
linkage and lynch pin supplied. The tractor top link must be category 2 on the
machine end or conversion bush used if category 3.
5. Adjust the Tractor link arm stabilisers to centralise the Post Driver and reduce
excessive lateral sway
6. You must familiarise yourself and understand the controls and their functions;
therefore after studying the previous section practise moving the levers before
connecting any hydraulic hoses the tractor. The diagram shows the safe
working zone the operator must work in while operating the post driver controls.
All dimensions are in millimetres.
