PLM-8000 Operation Manual
19
5. Measurement
5.1 Preparation
(1) Connect the power cable.
(2) Turn ON the power.
☞
Do not turn on the power as the lens is on the lens table or else it is possible to
occur errors as measuring or starting. If ‘Error
-Initial Error!!!
’ or ‘Setup Data Error’
,
‘
UV Init
Error’
,
‘
BLUE Init
Error’
is seen to the scre
en, refer the ‘
6. Self-diagnosis and
Maintenance
’.
WARNING
If any of the following occur, immediately turn OFF the power switch,
unplug the power cable from the AC outlet, and contact the dealer or the
agent who/where you purchase this machine.
When there is smoke, strange odor or abnormal sound.
When liquid has been spilled into the instrument or a metal object has
entered through an opening.
When the product has been dropped or its housing damaged
5.2 Measuring general lenses
(1) Connect the power cable.
(2) Turn ON the power.
(3) Place the lenses on the nosepiece.
①
Press the LR touch button(
)
to specify the left-eye lens or the right-eye
lens as necessary.
②
Place the lens on the nosepiece with the
convex side up.
(4) Lower the lens retainer.
