PLM-8000 Operation Manual
23
5.5 Measuring UV / BLUE
(1) Connect the power cable.
(2) Turn ON the power.
(3) Take out UV, BLUE cover and put in the lens of glasses like the below picture
(4) Press the read button to store the measure value.
When measuring UV, BLUE at the same time, click the graph button
then the bar graph is seen on the screen
5.6 Measuring prismatic lenses
(1) Connect the power cable.
(2) Turn ON the power.
(3) Place the lenses on the nosepiece.
①
Press the LR touch button to specify the left-eye lens or the right-eye lens as
necessary.
②
Place the lens on the nosepiece with the convex side up.
(4) Lower the lens retainer.
(5) Change the prism indication type on the basis of the prism type (X-Y(BU/D,BI/O), P-
B(polar coordinates: angle) indicated on the prescription.
(6) Adjust the focus.
(7) Press the read button to store the measure value.
(8) Mark using the marking lever.
(9) Raise the lens retainer, and place the other lens on the nosepiece.
(10) Adjust the focus.
(11) Press the read button to store the measured value. Press the Print button to print out
the measured value.
5.7 Measuring PD / OH
(1) Connect the power cable.
(2) Turn ON the power.
(3) Pull down the LCD as much as possible
(4) Click the glasses shaped icon
(5) Put the marked lens on the LCD
(6) Adjust it with the +, - icon in the light of a
thickness of a glass frame
