PLM-8000 Operation Manual
21
(6) If the far distance portion is discovered, indication of lens
cursor will show to find the location of near portion and ADD
value is presented on screen.
(7) Save measured value by pressing read button. If exterior
printer is supported.
☞
In case of bottom frame of near distance portion is cut out,
adjacent or lens area is connected after the center of near
distance portion, maintain lens table and confirm the power by
pressing read button when the power is at the maximum.
☞
When measuring the left lens, the lens moves to the right about 2 ~ 3mm or When
measuring the left lens, the lens moves to the right about 2 ~ 3mm the more accurate
measurement can be measured.
Left Lens Right Lens
5.3.3 Measuring Bifocal / Trifocal Lenses
(1) Connect the power cable.
(2) Turn ON the power.
(3) Switch to progressive mode from user setting screen mode(Press progressive button
on the normal measurement screen)
(4) Place the lenses on the nosepiece.
①
Press the LR touch button(
) to specify the left-eye lens or the
right-eye lens as necessary.
②
Place the lens on the nosepiece with the convex side up
