93-340-74 Issue 5 CirrusPro Locator Operating Manual Page 3 of 12
1.0 General Safety Rules
2.0 Cirrus Pro Locator
The Cirrus Pro Locator is the next generation of portable air sampling detector. Belonging to the Pro
Series family, the Fire detector uses
Cloud Chamber Detection
technology for very early warning fire
detection. The unit can identify the source and take you within one foot of an invisible and odourless
fire in a 20,000 sq. ft room. The fire locator features adjustable sensitivity levels that can guide you in
the right direction. Because it uses
Cloud Chamber Detection
you don’t have to worry about the device
giving you false information; it is immune to dust, heat, cold, humidity and other factors that could
deter it from leading you to the right location.
CAUTION: Carefully read through this
entire manual before using your new
Cirrus Pro Locator.
Personal Safety: Stay alert, watch what
you are doing and use common sense
when operating the fire detector.
Do not operate the unit in areas with
heavy smoke concentrations.
Do not operate the unit while standing in
water.
Servicing must be performed only by
Protec Fire Detection plc.
Charge the battery only with the specified
charger for the battery.
Do not overreach when operating the
Pro Locator’s handheld probe.
Keep correct footing and balance.
Use only accessories that are
recommended by the manufacturer.
1 – Power Switch & Power LED
2 – Charging/Fault LEDs
3 – LCD Display
4 – Sensitivity Adjustment Buttons
5 – Handheld Sampling Probe
6 – Pipe Inlet/Pipe Guard-Side Mount
7 – DC Charger
8 – Battery Charger (Included)
ProSeries detectors can tell you which room,
but only the ProLocator can tell you where in the room.
Do not enter or sample in an area if either flames or smoke are present.
9
