PRS 500 E
User Manual
5069-0-8002
PROTEC GmbH & Co. KG, In den Dorfwiesen 14, 71720 Oberstenfeld, Germany
7 von 39
General Notes
WARNING!
No changes of the ME device!
Mechanical – Electric Warning
WARNING!
All of the movable assemblies and parts of this equipment should be operated
with care and routinely inspected in accordance with the manufacturer's
recommendations contained in the equipment Accompanying Documents.
Maintenance and service is only to be performed by Customers authorized by
PROTEC GmbH & Co. KG.
Live electrical terminals are deadly.
Do not remove flexible high-tension cables from X-ray tube housing or high-
tension generator and/or access covers from X-ray generator.
For all components of the equipment protective earthing means must be
provided in compliance with the national regulations.
Failure to comply with the foregoing may result in serious or fatal bodily
injuries to the operator or those in the area.
Radiation Warning
WARING!
The component of the equipment described within this Document is part of a
system for the intended generation of X-rays for medical diagnosis.
X-rays generate a potential risk for both patients and operators.
For this reason, the application of X-rays for a given medical purpose must
aim at the minimization of radiation exposition to any persons. Those persons
responsible for the application must have the specific knowledge according
to legal requirements and regulations and must establish safe exposure
procedures for these kinds of systems. Those persons, responsible for the
planning and installation of this equipment, must observe the national
regulations.
The system causes different ionising radiation. The purpose is to create
characteristic X-ray radiation. The intensity depends on the adjusted values of
voltage, current and time. The radiation comes orthogonal out of the X-ray
tube and is limited by the collimator.
