Protec 7069-9-8050L, User Manual, Page: 29 / 39

PRS 500 E
User Manual
5069-0-8002
PROTEC GmbH & Co. KG, In den Dorfwiesen 14, 71720 Oberstenfeld, Germany 29 von 39
6
Electrical data
NOTE
The radiographic system is in need of the following power supply (see table „Power
supply Generator).
Type generator
PROVARIO
HF 50
PROVARIO
HF 60
PROVARIO
HF 80
Venus 50R, 3
phase
Venus 50R, 1
phase
Output Power 50kW 65kW 80kW 50kW 50kW
Power supply
voltage
400V AC
380V AC/400V
AC
220V AC
Phase 3PH-N-PE 3PH-N-PE 1phase
Power frequency 50/60 Hz 50/60Hz 50/60Hz
Electrical
resistance per
phase
0,3Ω 0,2Ω 0,12Ω 0,15 Ω/0,17 Ω 0,5Ω
Fuse 50A 63A 16A
List (Power supply generator)
WARNING!
To lower the risk of an electrical shock, the device can only be run on a power
supply with a protective conductor.
6.1 Electromagnetic Compatibility (EMC) after EN 60601-1-2
CAUTION!
The radiographic system PRS 500 E is, as a medical electrical electric device,
subject to particular precautionary measures in regard to EMC and is required
to be installed and prepared for initial use as described within the
accompanying documents.
CAUTION!
Mobile HF-Communication devices shouldn’t be used closer than 30cm (12
Inch) to the marked parts and cables of the PRS 500 E. Disregarding this can
cause a decrease in the performance features of the device.
CAUTION!
The X-ray generator integrated into the radiographic system PRS 500 E sends
out electromagnetic waves during operation, which could cause interference
with other devices.
For EMC guidelines and manufacturers declaration for the generator
according to EN 60601-1-2, see the separate User Manual for the
corresponding generator.