V1.0_2021-05-17
PROGNOST XP, XPE, XPE-Akku
Instructions for use
5038-0-0002
17 of 51
1.
Arrester for wheels
2.
Brake bracket for table top
3.
Table top
4.
Type Label, UL label, FDA label, Symbols for the brake
5.
Rear side long handle (Optional)
6.
Front side hand grips (Optional)
7.
Lateral edge protection
8.
Deflector for easier positioning of the table above detector
9.
Shock protection profile for rear tabletop accessory rail
10.
Protection film for internal covers
3.3.1.1
Brake Rollers
In order to fix the table on the floor in all directions, it has 2 brake rollers on the front side, which must
be locked with the arrester on the left and right side before a patient gets on or off the table.
3.3.1.2
Brake Bracket for the Tabletop
By operating the brake bracket with the foot, the brakes of the tabletop are released, then the table top
can be moved floating by hand.
3.3.1.3
Hand Grips (optional)
A long handle for the back of the table top and 2 handles for the front of the table top are available as
options. Both handles can only be removed with tools. The long handle is intended for easier
ascending and descending of the patient. The table as well as the table top can be better shifted with
the short handles.
3.3.1.4
Lateral Edge Protection (optional)
The lateral edge protection prevents direct contact of the detector housing with the Z-angle bracket.
3.3.1.5
Shock Protection Profile (optional)
The shock profile prevents a direct contact of the rear accessory rail of the table top with the tube
column stand or the detector holder.
3.3.1.6
Center Stop (optional)
The center stop for the transverse movement of the table top improves the alignment of the table to
the X-ray tube assembly.