V4.0_2021-05-26
PROGNOST XS
Instructions for use
5034-0-0002
7 of 25
1
Device Description
1.1
Introduction
The instructions for use describes the performance characteristics and operational aspects, required for
efficient and effective use of the PROGNOST XS.
Prior to working with the PROGNOST XS, the operator is required to read through the instructions for
use, especially the safety notes as well as the chapter regarding operation.
1.2
Description
The PROGNOST XS X-ray exposure tables are lightweight, mobile patient positioning tables with solid
laminate table top with melamine resin layer for easy cleaning.
Types
PROGNOST XS
Table frame colour RAL 9003
7034-0-0000
Table top
1963mm x 655mm x 6mm
Optional Accessories
•
Mattress 1900mm x 600 mm x 15mm
Hardware and Network System Requirements
As a stand-alone product, the PROGNOST XS has no hardware or network connection and therefore no
hardware or network requirements.
Installation
NOTE
The installation of the PROGNOST XS must be performed by the PROTEC Customer
Service Department or a service authorized by them.
For more information, please see the separate “Installation manual” of the PROGNOST XS
.
Contact information of persons qualified to perform installations are available upon request at:
PROTEC GmbH & Co. KG
In den Dorfwiesen 14 | 71720 Oberstenfeld
Telephone: +49 (0) 7062 – 92 55 0
Fax: +49 (0) 7062 – 92 55 60
E-Mail: [email protected]
Internet: www.protec-med.com
1.2.3.1
Floor Loading Capacity
NOTE
The PROGNOST XS is primarily made of metal pieces. This has a corresponding effect
in the weight of the device.
The
PROGNOST XS has a weight of 48kg.
Every technician is obliged to check the floor loading capacity. Also raised floors and
hollow floors have to be taken into account.