12
：
Water out Temperature
：
Error Warning
2.3 Instruction for special display
When turn off the heat pump,screen only shows the last running symbol and
data shows 0.
When heat pump has error warning,symbol
displays and twinkles, water in area
displays P or E, water
out area
displays Error code.
3. Instruction for Function
3.1Switch Modes
When heat pump is on,short-press
to switch Heat/Cool/Auto,each mode is available for selecting
Boost/Smart/Silent three modes
3.2Set Temperature
When heat pump is on,short-press
or
into water temperature setting surface. Water in area
t
emperature value twinkles,press
or
to select value,press
to confirm and exit current setting.No
any set up after 30 seconds,the controller will save the last setting and go back to original surface.
3.3Set Parameter
When heat pump is on,Long-press
into memu,
displays Parameter Query,press
or
select
among Parameter Query/Parameter Setting/Debugging Status/History Fault.Short-press
to confirm your
selction and switch to
,press
or
select,
displays the value.
When on status of Parameter Setting ,
and
display two
“
88
”
,it is asking you to enter your
password, press
and
to select,press
to confirm.When password is right,
displays
Parameter No.
Displays related parameter value.
When on status of Debugging ,
displays the Number, 01 water pump debugging, 02 testing mode, and
displays ON or Off. The related mode symbol twinkles after entering into testing mode.
Display on each status:
Parameter Query Parameter Setting
Debugging Status
Error Query
Note
：
Value twinkles,means it is available for changing,or in verse
%
