Chapter 5 Award BIOS Setup
Prox-2622 USER
′
S MANUAL
Page: 5-23
IDE PRIMARY/SECONDARY MASTER/SLAVE UDMA:
Ultra DMA/33 is a DMA data transfer protocol that utilizes ATA commands
and the ATA bus to allow DMA commands to transfer data at a maximum
burst rate of 33 MB/s. When you select Auto in the four IDE UDMA fields,
the system automatically determines the optimal data transfer rate for each IDE
device.
ON-CHIP PRIMARY/SECONDARY PCI IDE:
The Integrated peripheral controller contains an IDE interface with support for
two IDE channels. Select Enabled to activate each channel separately.
ONBOARD PCI SCSI CHIP:
Select Enabled if your system contains a PCI SCSI chip and you have a PCI
SCSI card.
USB KEYBOARD SUPPORT:
Select Enabled if your system contains a USB controller and you have a USB
Keyboard.
INIT DISPLAY FIRST:
This item initializes the AGP video display before initializing any other
display device on the system. Thus the AGP display becomes the primary
display.
ONBOARD FDC CONTROLLER:
Select Enabled unless you installed an add-in FDC.
ONBOARD PARALLEL PORT:
Select a logical LPT port address and corresponding interrupt for the physical
parallel port.
PARALLEL PORT MODE:
Select an operating mode for the onboard parallel port. Select Compatible or
Extended unless you are certain both your hardware and software support EPP
or ECP mode.
