Prostage WAHryTone, User Manual

Page: 11 / 31

Page 11
5.3 Adjusting and Saving Sounds | Presets
To edit a preset, you must first select it in the preset list. Then move the white bar to the right and click on the
orange symbol. This opens the window for editing the preset. If you have selected a tuner preset and the Tuner
window did open, you will reach the window for editing the preset via the icon in the top right of the tuner win-
dow (only in portrait mode).
In this Edit window you can now set all parameters. Depending on the selected operating mode, different param-
eters are available. The parameters are described in detail in chapter 8.2.
To save a preset, click [Save Preset as ...] at the bottom of the window. In the dialog window that opens, you can
give the preset a new name and, if you want, also a new preset number. If you do not change anything, the current
preset will be overwritten. To confirm, click [Store Preset].
Important => Preset 128 has a special function and therefore has to be a Bypass Preset. See chapter 4.4 for more
information.
5.4 Delete Sounds | Presets
You can delete a preset in the preset list as follows: Move the black bar of a non-selected preset to the right and
click the red icon. A window opens in which you have to confirm that the preset should be deleted. Or you can
also cancel the command.
The currently selected preset can not be deleted.
5.5 Changing the Basic Settings
You can set the basic settings of the WAHryTone in the [Settings] window. You can reach it from the preset list via
the icon at the top right. What the individual parameters means is explained in chapter 8.1.
5.6 Error Messages
If you get an error message, most likely your connection to the device is lost. Make sure you are not too far away
from the device and reconnect as described in chapter 5.1.