•
Store it in its box or in a clean, dry place.
•
Do not drag or hang the spa with the power cord.
•
This spa appliance is designed for indoor use only.
•
Do not the appliance close to fireplace or other heating sources.
Troubleshooting:
Problem
Cause
Solutions
Water jets not
working
Water filter or valve is
blocked.
Check and clean up the water
filter and water drainage pipe if
necessary.
Heating not working
Heating function is turned off.
It may reach the preset
maximum water temperature.
The adjusted highest water
temperature may be too low.
The current water temperature
in the bucket is already higher
than your preset water
temperature.
Press the Temp+ to adjust the
preset highest water
temperature.
Spa stops working
Preset working time is up
(max. is 60 minutes).
Try to unplug the power source
completely for a while and plug
in the power again.
Auto shut off for protection
when using too long time.
Try to unplug the power source
completely for a while and plug
in the power again.
Water drainage valve is not
closed.
Check and make sure the water
drainage valve is closed.
The water temperature is
higher than your preset highest
temperature.
Try to fill in cold water to cool
down the water temperature.
Or, reset to the highest water
temperature.
Rolling massage is over-used.
Turn off the spa completely and
let it cool down for a while
before using it again
water jet not strong
enough
Water level can affect the
water jet
Try to turn on massage function
and wait for a while
Try to lower the water level
