Thank you for purchasing this product, we are sure that it will serve you for many years to come.
To optimise the performance of this product, please read these operating instructions carefully to
familiarise yourself with the basic operations of this unit. Please retain them for future reference.
This product has been tested at the factory before being shipped to you.
To prevent or reduce the risk of electrical shock or fire, do not expose the unit to rain or moisture.
To prevent a fire hazard, do not expose the unit to any naked flame sources. Unplug this apparatus
during lightning storms or if it is unlikely to be used for long periods of time.
When installing the unit, please ensure you leave enough space around the unit for ventilation.
Slots and openings in the unit are provided for ventilation to ensure reliable operation of the
product and to protect it from overheating. To prevent fire hazard, the openings should never be
blocked or covered. Always handle the power cable by the plug. Never pull out the plug by pulling
on the cable. Never touch the power cable when your hands are wet as this could cause an electric
shock. Do not tie a knot in the cable. The power cable should be placed such that it is not likely to
be stepped on. A damaged power cable can cause a fire or give you an electrical shock. Check the
power cord periodicaly, if you ever find that it is damaged, replace it before using the unit again.
The voltage of the available power supply differs according to country or region. Be sure that the
power supply voltage of the area where this unit is to be used meets the unit’s requirement.
The lightning flash symbol inside a triangle is to alert the user to the presence high voltage within
the unit’s enclosure that may be of sufficient power to constitute a risk of electrical shock to you.
The exclamation mark inside a triangle is intended to alert the user to the presence of important
operating and maintenance instructions in the literature accompanying the appliance.
Caution: to prevent the risk of electric shock, do not attempt to open the unit. No user-‐serviceable
parts inside. Refer all servicing to qualified service personnel.
Select the installation location of your unit carefully. Avoid placing it in direct sunlight or locations
subject to vibration and excessive dust. Do not use the unit where there are extremes in
temperature (below 41°F / 5°C or exceeding 95°F / 35°C).
Unpacking and safety -‐ please unpack your new product carefully. Your new product should reach
you in perfect condition. Please check that no damage has occurred during transit. If any damage
is found, do not operate your unit. Please contact the retailer you purchased it from immediately.
If there is any damage to the mains cable do not use the device. Always disconnect the unit from
the mains supply when carrying out any cleaning of the unit.
Manufacturer declarations
In compliance with the following requirements: RoHS Directive (2002/95/EU) and WEEE Directive
(2002/96/EU). If this product is ever no longer functional please take it to a recycling plant for
environmentally friendly disposal.
CE declaration of conformity
R&TTE Directive (1999/5/EU), EMC Directive (2004/108/EU), Low Voltage Directive (2006/95/EU).
