ProSoft ProLinx Wireless 6201-WA-MNET, Setup Manual

Page: 13 / 48

Configure the MNET Client Module 6201-WA-MNET ♦ ProLinx Wireless
High Speed Wireless Modbus TCP/IP Gateway
ProSoft Technology, Inc. Page 13 of 48
June 27, 2007
3 Configure the MNET Client Module
In This Chapter
¾ Complete the ProSoft Configuration Builder Sections............ 14
¾ Save and Download the Configuration File to the 6201-WA-MNET
Client...................................................................................... 23
Based on the sample application, the remote Server is connected to a 6201-WA-
MNET configured as a Client. The goal here is to begin to establish
communications between the two MNET modules. The default configuration is
designed to pass 1200 words between each module. Each module is configured
separately.
Configuration is accomplished using ProSoft Configuration Builder (PCB). The
default configuration file is
PROLINX WIRELESS SAMPLE.PPF
.
1
Start PCB.
2
Select
File
→
Open
.
3
Navigate to the location where you copied the
PROLINX WIRELESS
SAMPLE.PPF
file and select this file.
4
Expand the
MODBUS TCPIP to MODBUS TCPIP
folder.
5
Expand the
6201-WA-MNET_Client
module selection.