Configuration and Start-Up
PS69-DPS
♦
CompactLogix or MicroLogix Platform
Profibus DP Slave Communication Module
ProSoft Technology, Inc.
Page 17 of 94
January 12, 2009
2
Configuration and Start-Up
In This Chapter
PS69-DPS Sample Add-On Instruction Import Procedure..................... 17
5000........................................................................................ 30
500.......................................................................................... 33
Configuration ............................................................................... 35
The following sections will describe the individual steps for configuration and
start-up of the PS69-DPS module. Install the PROFIBUS Slave module into a
free slot in the CompactLogix or MicroLogix controller. Information regarding
installation of communication modules in CompactLogix or MicroLogix systems
can be found in the section Installation and Wiring or in the Rockwell installation
manual for the appropriate controller system. The slave module must be within 6
modules of the I/O bank's power supply.
Configuration and parameterization of the module is carried out in three steps
Configuration of the module in a CompactLogix or MicroLogix project of the
RSLogix5000 or RSLogix 500 programming tool.
Determine configuration method to be used by the Slave module during
startup.
Creating the data objects and the ladder diagram in RSLogix5000
2.1 PS69-DPS
Sample
Add-On
Instruction Import Procedure
Note
: this section only applies if you are using RSLogix 5000 version 16 or higher.
The following file is required before you start this procedure. Copy the file from
the ProSoft Solutions CD-ROM, or download it from http://www.prosoft-
technology.com.
File Name
Description
AOIPS69DPS.L5X
L5X file contains the Add-On instruction, the user defined
data types, data objects and ladder logic required to setup
the PS69-DPS module
2.1.1 Create a new RSLogix5000 project
1
Open the File menu, and then choose New…
