Configuration and Start-Up
PS69-DPS
♦
CompactLogix or MicroLogix Platform
Profibus DP Slave Communication Module
ProSoft Technology, Inc.
Page 33 of 94
January 12, 2009
2.3 RSLogix
500
Contained in the sections below are the instructions for configuring the PS69-
DPS module in a MicroLogix system using RSLogix500.
2.3.1 Module
Selection
Create a new project in RSLogix500 using a MicroLogix1500 controller. Then the
first step is to select the module and add it to your project. In the Controller
Organization window, expand the Controller folder, and then select IO
Configuration. Click the right muse button to open a shortcut window, and then
choose Open.
This action opens the following dialog box.
In the I/O Configuration dialog box, select the slot number in the left pane. In the
right pane, select and double-click
Other - Requires I/O Card Type ID.
