ProSoft Technology ControlLogix inRAx MVI56E-MNETR User Manual Download

Page: 53 / 175

MVI56E-MNETR ♦ ControlLogix Platform

Configuring the MVI56E-MNETR Module

Modbus TCP/IP Interface Module with Reduced Data Block

User Manual

ProSoft Technology, Inc.

Page 53 of 175

June 14, 2011

2.1.2 Renaming PCB Objects

Notice that the contents of the information pane and the configuration pane
changed when you added the module to the project.

At this time, you may wish to rename the

Default Project

and

Default Location

folders in the tree view.

Select the object, and then click the right mouse button to open a shortcut
menu. From the shortcut menu, choose

ENAME

Type the name to assign to the object.

Click

away

from the object to save the new name.

Configuring Module Parameters

Click on the

[+]

sign next to the module icon to expand module information.

Click on the

[+]

sign next to any

icon to view module information and

configuration options.

Double-click any

icon to open an

Edit

dialog box.

To edit a parameter, select the parameter in the left pane and make your
changes in the right pane.

Click

to save your changes.

Printing a Configuration File

Select the module

icon, and then click the right mouse button to open a

shortcut menu.

On the

shortcut menu, choose

IEW

ONFIGURATION

This action opens the

View Configuration

window.

In the

View Configuration

window, open the

ILE

menu, and choose

RINT

This action opens the

Print

dialog box.

In the

Print

dialog box, choose the printer to use from the drop-down list,

select printing options, and then click

OK.

Summary of Contents for ControlLogix inRAx MVI56E-MNETR
















































































































































































Search results

Summary of Contents for ControlLogix inRAx MVI56E-MNETR

Reviews:

Related manuals for ControlLogix inRAx MVI56E-MNETR

Brands by name

Popular brands

ProSoft Technology ControlLogix inRAx MVI56E-MNETR, User Manual

Search results

Summary of Contents for ControlLogix inRAx MVI56E-MNETR

Reviews:

Related manuals for ControlLogix inRAx MVI56E-MNETR

Brands by name

Popular brands