ProSoft Technology ControlLogix inRAx MVI56E-MNETR User Manual Download | Manualshive

Page: 110 / 175

background image

Reference

MVI56E-MNETR ♦ ControlLogix Platform

User Manual

Modbus TCP/IP Interface Module with Reduced Data Block

Page 110 of 175

ProSoft Technology, Inc.

June 14, 2011

5.1

Product Specifications

The Modbus TCP/IP Client/Server Enhanced Communication Module with
Reduced Data Block allows Rockwell Automation

®

ControlLogix

®

processors to

interface easily with Modbus TCP/IP-compatible devices, such as Modicon
Programmable Automation Controllers (PACs) and a wide variety of Modbus
TCP/IP-compatible instruments and devices.
The MVI56E-MNETR uses a reduced Input/Output (I/O) data image block size for
transferring data between itself and a ControlLogix processor. This makes it ideal
for remote rack applications using ControlNet™ or EtherNet/IP™ process
networks. The module also works well for applications that require redundant
ControlLogix processors.
MVI56E-MNETR enhancements include local and remote configuration and
diagnostics through the module’s Ethernet port, CIPconnect

®

technology for

bridging though Rockwell Automation ControlNet and EtherNet/IP networks, and
an on-board web server for access to module documentation and sample
program files.

5.1.1 General Specifications

Reduced I/O image size designed specifically to optimize remote

rack implementations

Backward compatible with previous MVI56-MNETR versions

Single-slot 1756 ControlLogix backplane compatible

10/100 Mbps auto crossover detection Ethernet configuration and application

port

User-definable module data memory mapping of up to 5000 16-bit registers

CIPconnect-enabled network configuration and diagnostics monitoring using

ControlLogix 1756-ENxT and 1756-CNB modules and EtherNet/IP pass-
through communication

ProSoft Configuration Builder (PCB) software supported, a Windows-based

graphical user interface providing simple product and network configuration

Sample ladder logic and Add-On Instructions (AOI) are used for data transfer

between module and processor

Internal web server provides access to product documentation, module

status, diagnostics, and firmware updates

4-character, alpha-numeric, scrolling LED display of status and diagnostics

data in plain English – no cryptic error or alarm codes to decipher

ProSoft Discovery Service (PDS) software used to locate the module on the

network and assign temporary IP address

Personality Module - a non-volatile, industrial-grade Compact Flash (CF) card

used to store network and module configuration, allowing quick in-the-field
product replacement by transferring the CF card

«
...
108
109
110
111
112
...
»

Summary of Contents for ControlLogix inRAx MVI56E-MNETR
















































































































































































Reviews:

No comments

Related manuals for ControlLogix inRAx MVI56E-MNETR

Brand: Lawler Pages: 5

Brand: Sole Diesel Pages: 8

Brand: U-Prox Pages: 31

Brand: IBM Pages: 276

Brand: IBM Pages: 32

Brand: IBM Pages: 157

Brand: K&K Pages: 6

Brand: MacDon Pages: 32

Brand: K&K Pages: 6

Brand: Yamaha Pages: 92

1020 CAN-RS232-RS422 MFL

Brand: PENKO Pages: 29

Brand: Elfa Pages: 22

Brand: Tripp Lite Pages: 40

Brand: Hard Head Pages: 10

Brand: Planar Pages: 162

Brand: THK Pages: 134

Brand: MERCATOR Pages: 4

Brand: W&T Pages: 217

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands