~
8
~
9
.
Conference transmitter
1, microphone head: pick up sound input;
2, liquid crystal display;
3, power switch;
4, infrared port, receive infrared beam, so that the
frequency synchronization;
5, battery warehouse, assembly 2 AA battery;
IR
1
2
3
4
5
10
.
menu operation
(1), power on and off
1. Press the a power button, the receiver will begin energized and internal CPU initialization,
the system is restored to the when used on a working state.
2, in the boot state, press the power button, the system began to save the current settings,
and then automatically shut down power.
(2), frequency selection
1, according to about "
▲
" key or " "keys, frequency and channel menu will be flashing. This
could be a direct press"
▲
"key or " "key system Will increase or decrease the frequency
set by the original menu. If the long press "
▲
" key or" " button for 2 seconds, the
frequency will be quick step Or reduced.
(Note: Each channel operation method is the same)
2, choose a good frequency, press the "SET" button to send the infrared data to determine
the exit, such as no operation, the menu is flashing 5 confirmed exit.
▲
▲
▲
8
.
Bodypack Transmitter
7
.
Handheld Transmitter
~
7
~
1, Voice head module: pick up audio input;
2, IR window: IR infrared synchronous frequency window, Host frequency
synchronization data;
3, Display: display working status;
4, Power switch, long press the power switch;
5, Battery warehouse: the assembly of 2 AA batteries;
6, Transmit antenna;
2
1
IR
UP
ACT DOWN
3
4
5
6
7
8
9
1, power switch;
2, status indicator;
3, microphone input socket;
4, transmit antenna;
5, LCD display;
6, infrared frequency window;
7, battery warehouse (assembly
2 AA battery);
8, infrared ray key;
9, high and low emission power
conversion;
POWER
POWER
1
2
3
5
4
A
A
X 1
.5
v
A
A
X 1
.5
v
A
A
X 1
.5
v
A
A
X 1
.5
v
IR
1
2
3
4
5
