3
Caution
1.
The power cord only can be inserted in approved power sockets or adapters.
2.
High Temperature
Whe temperature of the desoldering tip will reach as high as around 400
℃（
752
℉）
When the power switch is on. Since mishandling may lead to burns and fire,
be sure to comply with the following precautions:
A.
Do not touch metallic parts near the desoldering tip/ nozzle.
B.
Do not use this system near the flammable items.
C.
Advise other people in the work area that the unit can reach a very high
temperature and should be considered potentially dangerous.
D.
Turn off the power switch while taking breaks and when finishing using.
E.
Before replacing parts or storing the system, turn off the power and let it
cool down to the room temperature.
F.
Warning: this tool must be placed on its stand when not in use.
G.
A fire may result if the appliance is not used with care, therefore:
a) Be careful when using the appliance in places where there is
combustible material.
b) Do not apply to the same place for a long time.
c) Do not use in presence of an explosive atmosphere.
d) Be aware heat may be conducted to combustible materials that out
of sight.
e) Place the appliance on its stand after use and allow it to cool down
before storage.
f) Do not leave the appliance unattended when it is switched on.
3.
Take care of your tools
Do not use the tools for any applications other than desoldering.
Do not rap the iron against the work bench or otherwise subject the iron to
severe shocks.
Do not file the desoldering tip to remove the oxide, please wipe the tip on the
cleaning sponge.
Use only accessories or attachments which are listed in the operation manual.
Use of other tools and other accessories can lead to a danger of injury.
Please turn off the power before connecting or disconnecting the desoldering
iron gun.
4.
Maintenance
4.1 Before further use, safety devices or slightly damaged parts must be
carefully checked for error-free and intended operation.
4.2 Inspect moving parts for error-f
ree operation and that they don’t bind, or
whether any parts are damaged.
4.3 Damaged safety devices and parts must be repaired or replaced by a
qualified technician, so long as nothing else is indicated in the operation
manual.
4.4 Use only accessories or attachments which are listed in the operation
manual. Use of other tools and other accessories can lead to a danger of injury.
