Prosense S-DP32 User Manual Download Page 24

 

 

24 

PRS-UM-DP32-EN-Rev.02-05.2019 

Warranty Statement 

All products are designed and manufactured to the latest internationally recognized 
standards by Prosense Technology under a Quality Management system that is certified to 
ISO 9001. As such Prosense Technology warrants its products against defective parts and 
workmanship and will repair or (at its option) replace any instruments which are or may 
become defective under proper use within 12 months from date of commissioning by an 
approved Prosense Technology representative or 18 months from date of shipment from 
Prosense Technology, whichever is the sooner. This warranty does not cover disposable 
batteries or damage caused by accident, abuse, abnormal operating conditions or 
poisoning of sensor. 
 
Defective goods must be returned to Prosense Technology premises accompanied by a 
detailed description of any issue. Where return of goods is not practicable Prosense 
Technology reserves the right to charge for any site attendance where any fault is not 
found with the equipment. Prosense Technology shall not be liable for any loss or damage 
whatsoever or howsoever occasioned which may be a direct or indirect result of the use or 
operation of the Contract Goods by the Buyer or any Party. 
 
This warranty covers instrument and parts sold to the Buyer only by authorized 
distributors, dealers and representatives as appointed by Prosense Technology. The 
warranties set out in this clause are not pro rata, i.e. the initial warranty period is not 
extended by virtue of any works carried out there under. 
 
In no event will Prosense Technology be liable for any incidental damages, consequential 
damages, special damages, punitive damages, statutory damages, indirect damages, loss of 
profits, loss of revenues, or loss of use, even if informed of the possibility of such damages. 
Prosense Technology's liability for any claims arising out of or related to this product will in 
no case exceed the order value. To the extent permitted by applicable law, these 
limitations and exclusions will apply regardless of whether liability arises from breach of 
contract, warranty, tort (including but not limited to negligence), by operation of law, or 
otherwise. 

Summary of Contents for S-DP32

























Reviews: