DVR User Manual
5
2.4 Remote Controller
It uses two AAA size batteries.
Step 1
: Open the battery cover of the remote controller.
Step 2
: Place batteries. Please take care the polarity (+ and -).
Step 3
: Replace the battery cover.
If it still doesn't work, please change a new remote controller to try, or contact your dealers.
The interface of remote controller is shown in Fig 2-4 Remote Controller.
Key points to check in case the remote doesn’t work.
1. Check batteries polarity.
2. Check the remaining charge in the batteries.
3. Check IR controller sensor for any masking.
4. Check the ID of the remote with respect to the DVR.
Fig 2-4 Remote Controller
2.5 Control with Mouse
2.5.1 Connect Mouse
It supports USB mouse through the ports on the rear panel.
If mouse is not detected or doesn't work, check below steps:
1. Make sure the mouse is plugged in the USB mouse port.
2. Try with a good know mouse.
Button
Function
REC
Record manually
Search
To enter search mode.
MEUN
To enter menu.
Exit
To exit the current interface.
ENTER
To confirm the choice or setup.
Direction
button
To move cursor in setup
ZOOM
To zoom in
PIP
To set picture in picture
To control playback. Play/Pause/Stop/Previous
Section/Next Section/Rewind/Fast Forward
Multi
To choose multi screen display mode.
Next
To switch between single picture and picture group
SEQ
To enter into auto dwell mode
INFO
Get information about DVR like firmware version,
HDD information
http://www.e-camere.ro/dvr/PROsee/PD-D08SH