Proscend M302-L, User Manual

Page: 86 / 144

INDUSTRIAL 4G LTE CELLULAR ROUTER
– B_UM V1.1.0
82
12.1.2
SNMP v3 User configuration
For SNMP version 3, you need to register authentication and allow a receiver that confirm the
packet was not modified in transit. There are three options to set up SNMP v3 configuration.
Service > SNMP > Community
Item Description
Mode Select from Disable or Enable to configure SNMP.
Community
Configure community setting with three options, including # 1, # 2
and #3.
Mode Select from Disable or Enable.
Name
Name each community.
Access Select from Read-Only or Read-Write.
Service > SNMP > SNMP v3 User configuration
Item Description
Mode
Select from Disable or Enable to configure SNMP. The default is
Disable.
Name Fill in your name.
Auth Mode Select from Authentication or Privacy.
Authentication Password Fill in your authentication password.
Authentication Protocol Select from MD5 or SHA.
Privacy Password Fill in your privacy password.
Privacy Protocol Select from DES or AES.
Access Select from Read-Only or Read-Write.