Press the POWER/SOURCE button on the
sounbar
repeatedly to switch to desired
mode.
Or press the AUX, OPTICAL, BT, LINE IN, USB button on remote control to turn
to
desired mode directly, the mode indicator on front of the
sounbar
will turn to:
Blue.............................................................................................Bluetooth Mode
Green.............................................................................................LINE IN Mode
Cyan
(blue+green)......................................................................
..
......USB Mode
GENERAL OPERATIONS
3. Press the POWER/SOURCE button on the
sounbar
or the
button on
remote
control to
power
on the
sounbar
. The LED light effect will light up.
2
.
Press and ho
l
d the "PAIR" button on the rear side of the subwoofer until the nearby
INDICATOR lamp starts to blink rapidly, then rel
e
ase the button.
Violet (red+blue).............................................................................AUX IN Mode
1
1
Orange (red+green)................................................................OPTICAL IN Mode
3
.
Press and hold the SB PAIR button on the soundbar
until the prompt of "Pair
ing
" is heard.
The blinking INDICATOR lamp
on the
subwoofer
also turns
solid blue, which indicates
the subwoofer
has been
connected to the
soundbar successfully.
Connect Subwoofer to Soundbar
Note:
Once the connection is established,
the subwoofer will connect to the soundbar
automatically when they are powered on
on next time. If not, make the connection
between them following the above steps.
Select an Audio Source
Power On
t
he
sounbar
1
. Press and hold the POWER/SOURCE button on the
sounbar
or press the button on
remote
to power off the
sounbar
. The
mode
indicator on the soundbar will turn red
again. (If the subwoofer has already been connected to the soundbar, the INDICATOR
will turn off and the POWER INDICATOR will turn to solid red.)
1. Connect
one end of
the a
dapter to the DC IN jack on the
soundbar, and
the
other end
into
an
AC outlet with AC
110~240V;
50/60Hz. The mode indicator will light up
in
red
.
2. Connect
one end of
the secon
d
a
da
pter to the DC IN jack on the subwoofer
, and
the
other end
into
an
AC outlet with AC
110~240V;
50/60Hz.
The POWER indicator on the
subwoofer will light up in red
.
Power
Off t
he
sounbar
1
.
Power on the
sounbar
as above.
Note:
1.
USB mode can be selected only when a USB device is inserted.
2. If you insert a USB device, other playback mode will be switched to USB mode, and audio
tracks stored in it start to play automatically. You can switch to other playback mode by
the operation
s
instructed above.
