Construction
①
1.Introduction to control panel
NO2 Instructions
NO.1 Spare par ts list
Please check the parts according to the following list when the machine unpacked.
Remote control
Remote control
battery(9V)
AC power cable
Charger
Fuse
Power light
DC socket
Fuse
AC socket
Switch
④
Power
120W
Speed
20-140 km/h
Color
Black,white,red
Frequency
2-8 sec/ball
Voltage
AC power(100V-240V),
DC power(12V)
Weight
Net weight:22KG,
Gross weight:25KG
Capacity
150 balls
Package
57.5*46*54.5cm
Parameters
Common faults and solutions
Notice
NO.4 FAQ
▲ Do not use the wet tennis ball to avoid stuck problem.
▲ Do not stand in the front of the shooting window when working.
▲ If there are ball into the machine carelessly , please turn off the power immediately and take out the ball.
Otherwise will cause malfunction (such as stuck ball) or even damage the machine.
▲ Power off when cleaning up interior of the machine, do not allow the minors operate the machine, avoid to
cause any danger.
▲ Regular clean the tennis fur inside of the machine..
▲ To prolong the battery life,please keep the battery working at least once in three months.
Fault conditions
Reason
Solution
No power
①Wrong switch or cable
②Fuse burn
No serving
①No power on the machine
or battery
②Ball stuck
Outside the court
②Speed is too fast
①Machine put on the wrong place
③Different type of tennis ball
②Change fuse
①Choose correct switch and cable
①Connect the power of the
machine and remote control
②Take out all the balls inside
of the machine
②Slow down the speed
③Choose the same standard tennis balls
①Put the machine in the middle point
of the base line
