Pro's Kit SS-979, User Manual

Page: 2 / 31

SAFETY INSTRUCTIONS
WARNING
Warnings and cautions are placed at critical points in this manual to direct the
operator’s attention to significant items. They are defined as follows:
WARNING
Failure to comply with a WARNING may result in serious injury or death.
CAUTION
Failure to comply with a CAUTION may result in injury to the operator, or damage
to the items involved.
NOTE: A NOTE indicates a procedure or point that is important to the process
being described.
EXAMPLE: AN EXAMPLE is given to demonstrate a particular procedure, point
or process.
Be sure to comply with following WARNINGS and CAUTIONS for your safety.
WARNING
Do not change or disassemble any components related to this product, it may
cause product damaged.
When replacing the fuse, be sure to turn off the power before operating.
During working period, do not turn off the power suddenly, the heat gun should be
placed on the bracket until cool off, otherwise it will damage the product
。
CAUTION
When the power is ON, the temperature of the hot air and the nozzle ranges from
100 to 500
℃
(212 to 932
℉
); the temperature of soldering iron ranges from 200 to
480
℃
(392-896
℉
).
To avoid injury to personnel or damage to items in the work area, observe the
following:
** Do not aim the hot air toward personnel or touch the metal parts near the
nozzle.
** Do not use the product near combustible gases or flammable materials.
** Avoid potentially dangerous work condition involving high temperature area.
** After use, the power should be off
** Change the components or tip after cutting off power and waiting to cool it.
** Do not touch the metallic parts near the tip.
** Do not strike the hand piece against hard surfaces.
** Be sure the unit is grounded. Always connect power to a grounded receptacle.
** Do not disassemble the machine.
** Do not modify the unit.
** Use Pro’sKit replacement parts only.
** Do not wet the unit or use the unit with wet hands.
** Remove power cord by holding the plug
– not the wires.
** Make sure the work area is well ventilated.
** Keep away from children.