PT-1207 User’s Manual
www.prokits.com.tw
8
Operating trigger
Use the operating trigger to start the tool and keep holding it for continuous
operation.
The rotation speed can be varied by depressing the operating trigger. The more
the trigger is depressed, the faster the rotation speeds.
To switch the tool off, release the operating trigger
Forward and reverse switch
Important!
The tool has to come to a complete stop before the reverse rotation
lever can be used; otherwise the tool may be damaged.
Use the forward and reverse switch to switch between clockwise (normal) and
anticlockwise rotation or vice-versa. With the forward and reverse switch in the
central position
,
the operating trigger is locked and cannot be depressed. Put
the forward and reverse switch in the central position before you put the tool
down, to avoid unintentional starting.
Operation for Working
Only use tool bits which can be securely fastened in the chuck and for which the
socket/screw bits has been designed.
Before using the machine check whether the screw-bit is inserted correctly.
Avoid over-tightening screws/nuts/bolt, otherwise the screw head may be
damaged or stripping of the threads may occur.
1. Screw insertion
Set the direction of rotation of the power tool to the clockwise direction. Insert
the tool bit into the slot in the head of the screw/nuts/bolt. Hold the tool bit
perpendicular to the head of the screw, otherwise the screw thread or the screw
head may be damaged. Press the tool bit against the screw/nuts/bolt with a
constant pressure while driving in the screw/nuts/bolt.
When the screw is completely screwed in, hold the machine firmly and release
the On/Off trigger immediately, otherwise the screw thread or the screw head
may be damaged.
2. Screw Removal
Set the direction of rotation of the power tool to the anticlockwise direction.
Insert the screw-bit into the slot in the head of the screw. Hold the screw-bit
perpendicular to the head of the screw/nuts/bolt, otherwise the screw or the
screw head may be damaged. Press the screw bit against the screw with a
constant pressure while removing the screw.
Maintenance and Clean
Attention! Always remove the battery before carrying out any work
