PT-1136 User’s Manual
www.prokits.com.tw
Product Introduction
Froward&
Reverse Switch
Angle Lock
Charging light indication
LED Light switch
LED Light
Initial operation
Charging the Battery
The rechargeable battery must be charged before the first use. Only recharge the battery once it
is has been fully discharged, i.e. the performance clearly decreases. Otherwise the battery may
not achieve its full capacity at the subsequent charge.
Important!
Only use the provided adaptor for charging the battery. When the speed
became slowly, charging the battery immediately. The red LED light will light up during the power
tool was charging. Please remove the adaptor from the power tool after 5-7 hours.
Inserting Tool Bits
The machine has a magnet in the slot. You can insert or remove screw bit quickly and easily
without any auxiliary tool.
Forward / Reverse Switch
Use the Forward / Reverse Switch to start the machine and keep holding it for continuous
operation. To switch the machine off, release the Forward / Reverse Switch
Important!
Do not switch quickly. Wait for operating stop, then switch to desire
operation, to avoid switch damaged
5
