Page 2 of 5
IF YOU HAVE BARS THAT CAN BE MOVED…
Move the bars to 30” (76cm) apart.
LOAD BASKET ONTO RACKS.
Center basket over your rack’s crossbars.
DO NOT ATTACH BRACKETS
TO UNSTABLE POINTS.
Do not attach brackets at these locations.
•IF YOU HAVE FIXED BARS:
•IF YOUR BARS MOVE:
(SIDE VIEW)
A friend
would make
this easier .
TIGHTEN YOUR CROSSBARS
IF YOU LOOSENED THEM.
BARS THAT CANNOT MOVE…
Continue to
STEP
.
ATTACH FAIRING TO EITHER END OF BASKET.
Pry open the
SnapArounds,
attach them
to the LOWER
FRONT BAR.
• Insert bolts through
washers, fairing
and SnapArounds.
• Attach knobs and TIGHTEN.
NOTE: The fairing can fold down when
carrying long slender loads.
Remove the machine screws from
the ends of the Voyager tubes.
NOTE
: Always replace
machine screws with
washers (from Voyager)
into same holes when
reassembling.
Insert screws with
washers into each
of the joints and
tighten them.
ASSEMBLE
THE BASKET.
